Our work on this project is presented in a thread last posted May 20th '06. Work contunued, but posting flaged. Now, after a Motherboard crash, college graduation,
trip to visit son in Peace Corp, a trip to surprise the mother of the bride, AND MOST IMPORTANTLY, A TWO WEEK SHAKE DOWN CRUISE WITH OUR SCAMP; we have time to post pictures of our now finished front dinette.

At last posting we had installed a mounting board on the front wall of the scamp with fiberglass


Click to view attachment




12V wiring for future undefined projects was installed. then the reflcxtix insulation and rat fur were closed using spray adhesive.
Click to view attachment


The table was made to follow the style of the new main dinette table. A "no post" support was used in conjundtion with a rail type wall attachment.
Click to view attachment


oops out of space. to be continued.....

continued:

The no post support without table and with table looking from below.

Click to view attachmentClick to view attachment

All done....and boy!!, do we like it!

Click to view attachment

Click to view attachment

Good to hear from you again! Sounds like you have been very, very busy.

I really like the improvements. . That table support looks great. No getting ones feet caught up in it.

Oh, WOW! You were posting the last pictures while I was responding.

Great job! You'll love the improvement..

Thanks.......

We said done......we know it will never be done...that'd be no fun.

We should have said fully usable. When we finally hooked the propane up last week the stove and refer worked and nothing leaked. this weekend we may get to try out the furnace.....they're talking frost .

Good job! I'm very impressed with your workmanship. As one who has done this conversion I can assure you that you'll enjoy the trailer a whole lot more configured this way. A place to eat and sleep with a minimum of fuss and bother, isn't that what these things are all about?

Have fun!

Bending aluminum pipe to make a pedestal that's light weight and out of the way is a very neat and clever solution. Great job.

Very nice modification.
Looks good without a post too---ours is done and I will NOT have dh change our design!!
The front dinette has been the best modification we have done in our trailer---absolutely love it...

I agree that it's nicely done. Diane, is that aluminum tubing, or something like plated or galvanized steel? The size (diameter and wall thickness) would also be good to know, for anyone thinking of stealing duplicating the design.

Thanks everyone.

Good eyes B-P, The post is 3/4 steel conduit tubing. It does have a bit of flex and the design transfers a lot of force to the mounting rail at the rear. The table travels in the broken down configuration in which it nests between the seat boxes. I'm considering an additional brace across the bend to give it a little more rigidity. It works great as is though; but, there is always room for improvement.

Steal away, I'll be interested in your improvements and ideas. Will be happy to answer any questions & provide closeup photos if needed.

Dave and Diane

Dave and Diane, thanks for the details. Conduit is inexpensive, readily available, and easily bent at a suitable radius, so it's fortunate that it's strong enough. For someone duplicating the design, a larger diameter conduit might be an option, rather than bracing, for more stiffness.

I can believe that there is a lot of stress on the mounting rail, but in the earlier topic (92S13 front dinette, on going project), the supporting rib is shown fiberglassed into the wall, so there's substantial structure for it. Obviously, even if the details were not set back in April, there was a plan...

This won't be happening any time soon in my Boler, but it might be nice way to improve access to the stock front dinette, which currently has the typical folding leg support. Our dinette table is longer, so I would need to carefully consider the strength required.

You are right Brian, There was a rough plan for the no post support. I find that doing these projects takes me much less time than the thinking about them. I build them several different ways in my head first and try to envision how they will work and more importantly, in what ways each design won't work........

We have used this design for about 3500 miles this summer and have not found any real problems yet. Well, the seats; they are just the right size (a key deciding factor); but could do with a better quality foam padding. I may have to re build them to our comfort needs.

Yes, we really do love it this way. I'm surprised this is not a standard scamp option.

Dave and Diane

This reminds me of the Casita Freedom Deluxe.