|
|
02-12-2018, 07:46 PM
|
#1
|
Member
Name: Kim
Trailer: Uhaul
California
Posts: 78
|
Fiberglass NestEgg Question for Donna D.
Hi all! We have our Escape 15A listed for sale, and are picking up a 2014 NestEgg next weekend. My question for Donna D. is if the NestEgg qualifies to still be a member with this forum? (I surely hope so). I noticed that there is no information under "manufacturers" on the NestEgg, though it is the only commercially built fiberglass teardrop that I know (but no longer being produced?).
__________________
Name Kim
Trailer: 1986 Uhaul VT, Previous 1984 Uhaul CT
Tow Vehicle: 2016 Ford Explorer XLT AWD
California Bay Area
|
|
|
02-12-2018, 07:55 PM
|
#2
|
Senior Member
Name: Robert
Trailer: 2015 Escape 19 "Past Tents" 2018 F150 Lariat 2.7L EB SuperCrew
Arkansas
Posts: 1,298
|
Not Donna, but I don't know of any "qualifications" to be a member of this forum. All are welcome. Your NestEgg may not be entirely molded fiberglass, but who cares?
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
02-12-2018, 08:03 PM
|
#3
|
Senior Member
Trailer: 13 ft Scamp
Posts: 1,773
|
I agree welcome... just be sure to post plenty of pictures
|
|
|
02-12-2018, 08:29 PM
|
#4
|
Member
Name: Kim
Trailer: Uhaul
California
Posts: 78
|
I have been a member here for awhile. Just don't want to not get into the discussions and rallies.
__________________
Name Kim
Trailer: 1986 Uhaul VT, Previous 1984 Uhaul CT
Tow Vehicle: 2016 Ford Explorer XLT AWD
California Bay Area
|
|
|
02-12-2018, 08:30 PM
|
#5
|
Senior Member
Name: Dave W
Trailer: Trillium 4500 - 1976, 1978, 1979, 1300 - 1977, and a 1973
Alberta
Posts: 6,926
|
Welcome Kim!
|
|
|
02-12-2018, 08:38 PM
|
#6
|
Senior Member
Name: bob
Trailer: Was A-Liner now 13f Scamp
Missouri
Posts: 3,209
|
yep
you are certainly welcome here I don't know where she comes from on this site.
bob
|
|
|
02-12-2018, 09:35 PM
|
#7
|
Senior Member
Name: Robert
Trailer: 2015 Escape 19 "Past Tents" 2018 F150 Lariat 2.7L EB SuperCrew
Arkansas
Posts: 1,298
|
Quote:
Originally Posted by k0wtz
you are certainly welcome here I don't know where she comes from on this site.
bob
|
Where who comes from Bob?
__________________
"You can't buy happiness, but you can buy an RV. And that is pretty close."
|
|
|
02-13-2018, 05:34 AM
|
#8
|
Senior Member
Name: Jon
Trailer: 2008 Scamp 13 S1
Arizona
Posts: 11,953
|
The myPod is another commercially produced, teardrop size, all-molded fiberglass trailer. It's smaller than the typical teardrop, though, and lacks the usual rear clamshell galley.
I can't tell if the NestEgg is all-molded or not, but one old thread ( http://www.fiberglassrv.com/forums/f...omb-73856.html) mentioned "honeycomb" construction and "composite." I hope Donna chimes in- if anyone would know more about the NestEgg's construction, it is she. Kim, I'd love to hear more and see some photos of yours.
As to participation in the forum and related activities, you would be very welcome, as others have said. In the end, there is no ownership requirement, just an interest in and enthusiasm for "all-molded fiberglass towables."
Sounds like you are down-sizing a bit. Happy travels!
|
|
|
02-13-2018, 09:04 AM
|
#9
|
Member
Name: Kim
Trailer: Uhaul
California
Posts: 78
|
NestEgg has moved to Idaho and seems to be back in production. Their trailers are man of manufactured composite fiberglass: layers of fiberglass never a fiberglass honeycomb. Guess that doesn't mean molded, but all fiberglass construction. In excited to bring it home!
__________________
Name Kim
Trailer: 1986 Uhaul VT, Previous 1984 Uhaul CT
Tow Vehicle: 2016 Ford Explorer XLT AWD
California Bay Area
|
|
|
02-13-2018, 09:05 AM
|
#10
|
Member
Name: Kim
Trailer: Uhaul
California
Posts: 78
|
Hate auto correct! Man made over ....
__________________
Name Kim
Trailer: 1986 Uhaul VT, Previous 1984 Uhaul CT
Tow Vehicle: 2016 Ford Explorer XLT AWD
California Bay Area
|
|
|
02-13-2018, 10:13 AM
|
#11
|
Senior Member
Name: Jon
Trailer: 2008 Scamp 13 S1
Arizona
Posts: 11,953
|
That doesn't sound molded to me, either, but I hope you'll stay connected on FGRV. Share some photos when you get her home.
I think a true all-molded teardrop would be possible, practical, and way cool. I am seeing a swooping shape, molded-in, retro-style wheel fenders and clamshell doors sides and back. The divider between the sleeping compartment and galley would provide structural support. Any why not a honeycomb fiberglass floor?...
Sounds like you have the next best thing!
|
|
|
02-13-2018, 10:22 AM
|
#12
|
Commercial Member
Trailer: No Trailer Yet
Posts: 803
|
Forum
Not Donna D. either, but this forum has everybody and everything on it. When it started years ago and was owned by someone else it was supposed to be "molded fiberglass exclusive trailers" ( meaning the 2 halves were produced in a mold- not sheet fiberglass), and you had to have that to attend a meet. Most all the meets in the PCNW aren't like that anymore except some that are even brand exclusive. I am sure you can continue to be a member here if you wish but might find some of the teardrop forums more helpful. As for the manufactures listed on the top tab- those are all true molded fiberglass brands only made in molds. I thought you might be talking about getting a new "Nest" caravan by Airstream but I see it is a teardrop.
Deb
|
|
|
02-13-2018, 12:05 PM
|
#13
|
Member
Name: Kim
Trailer: Uhaul
California
Posts: 78
|
Thanks Deb for the clarification! I knew our Uhaul and Escape were two halves molded together, just wasn't sure about that being the original criteria. We will definitely post some pictures after I paint it, per usual for me.
__________________
Name Kim
Trailer: 1986 Uhaul VT, Previous 1984 Uhaul CT
Tow Vehicle: 2016 Ford Explorer XLT AWD
California Bay Area
|
|
|
02-13-2018, 05:40 PM
|
#14
|
Senior Member
Name: J Ronald
Trailer: Casita 17 ft. Liberty Deluxe
North Carolina
Posts: 236
|
Molded fiberglass
What is the criteria for molded? If the fiberglass is chopped and sprayed or layered with fiberglass cloth, both are done in a mold. I undrdstand forming a trailer from ready made sheets of FPR would not be a molded unit.
|
|
|
02-13-2018, 06:20 PM
|
#15
|
Senior Member
Name: Jon
Trailer: 2008 Scamp 13 S1
Arizona
Posts: 11,953
|
That's how I understand it too- chop gun or hand laid, although I don't know of any commercially manufactured molded trailers that are hand laid, other than a few spots here and there- joints and reinforcements. The key indicator is the use of large molds, typically but not always two, to form the main outer shell.
Some also mold the interior, either as large inner shell pieces (Oliver and Eggcamper) or as individual components (Scamp and Casita), but that is not a requirement to earn the designation all-molded.
|
|
|
02-14-2018, 01:18 AM
|
#16
|
Senior Member
Name: Kelly
Trailer: Trails West
Oregon
Posts: 3,046
|
Quote:
Originally Posted by J Ron
What is the criteria for molded? If the fiberglass is chopped and sprayed or layered with fiberglass cloth, both are done in a mold. I undrdstand forming a trailer from ready made sheets of FPR would not be a molded unit.
|
The criteria for being "molded" would be a trailer that was formed inside of a or occasionally "but not seen nearly as often" over the outside of a mold...hence the descriptive word "molded". No mold involved in the process means it is not a molded trailer.
|
|
|
02-14-2018, 04:12 AM
|
#17
|
Senior Member
Name: Peter
Trailer: G30 Elite Class C
British Columbia
Posts: 1,510
|
Quote:
Originally Posted by kkinna
Thanks Deb for the clarification! I knew our Uhaul and Escape were two halves molded together, just wasn't sure about that being the original criteria. We will definitely post some pictures after I paint it, per usual for me.
|
:Kim can you do us all a favor and load some pictures of outside and inside your Nestegg so we all can see what you have.
Peter
|
|
|
02-14-2018, 07:50 AM
|
#18
|
Senior Member
Name: Jon
Trailer: 2008 Scamp 13 S1
Arizona
Posts: 11,953
|
I received a PM suggesting that the NestEgg is in fact molded. I took a closer look at web photos, and zooming in reveals no indication of seams along the edges. So it appears you may still be "one of us" after all (for what that's worth... LOL).
The same PM also suggested one well-known molded manufacturer hand lays their shells rather than spraying. Frankly, I would have though it cost-prohibitive for such large molds, but I'd love to be wrong. Does anyone know for a fact whether any molded trailers are hand laid (other than spot reinforcement)?
|
|
|
02-14-2018, 02:41 PM
|
#19
|
Senior Member
Trailer: Eggcamper 2007 ('Wolf's Lair')
Posts: 329
|
Another Molded Teardrop
Another molded teardrop is the "TearDropp" made by Jim at EggCamper. It is quite a bit bigger than a "normal" teardrop trailer but has the same lines. You can almost stand up in one. Also the hatch to the rear galley is a lot higher, so much so that you could drive a motorcycle or ATV in (after removing the galley of course). I've only seen a couple of them "in the wild" but did get a good look inside and out when I picked up my new EggCamper back in 2007. I think several of them were bought by military Morale, Recreation and Wellfare facilities to use as rental units. They replaced the 13' and 16' Scamps. Unfortunately Jim isn't currently making EggCampers or TearDropps. Hopefully he will resume production in the future.
|
|
|
02-15-2018, 07:09 AM
|
#20
|
Senior Member
Name: Jon
Trailer: 2008 Scamp 13 S1
Arizona
Posts: 11,953
|
Fiberglass NestEgg Question for Donna D.
Orlen, have you run across a picture of an EggCamper Tear Dropp? My searching turned up empty. I visited Jim's website a number of times since entering the molded fiberglass world in 2012 and never saw any mention of it, either.
Very interesting.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
» Upcoming Events |
No events scheduled in the next 465 days.
|
|