Quote:
Originally Posted by Andy B
Could you put on a longer hose so that it would flex out of the way and come out the bottom?
|
This is what my hose does, it is long enough to go down through the gap in the bottom between the tank shelf and the generic Camco hard cover, which I modified to better fit the short 20lb tanks by cutting the bottom 1/3 off of the cover.
7-pin cable to left, flex gas line to right; next to center rail
Look for nut at center of top of cover (with flamingo leg inserted into hollow drilled into all-thread)
I also use the long piece of all-thread that the pressure regulator and the top tank clamp are attached to... mine is long enough to protrude through a small hole I cut in the top of the cover, where a washer and 3/4" nut hold the tank cover securely in place.