Boler floor

[jj giger]

ok my boler's floor is a little soft in the center my black tank is under it what would be the best way to fix this .

[Brian B-P]

Your black tank is under it, jj? Interesting... my black tank is on top of the floor, with the fresh and grey tanks under it. It might matter which tank is which, from the perspective of effort to possibly remove the tank, depending on the chosen method of repair.

Which floor plan is this: the side gaucho (B1700SGH), rear gaucho (B1700RGH), or another layout (with Bolers, you never know...)

There are some B1700's with fiberglass floors, although most (like mine) seem to be just plywood. Is there a fiberglass layer on top of or under the plywood, jj? Or is is just fiberglass?

And while I'm asking questions: what's on top of the floor - the finished surface? Mine is the original sheet vinyl flooring, so if I removed part for a floor repair I would have some interesting patching to do.

[Herb P]

Mine was wood/lino. Now it's wood and laminate.

The laminate cost about $30, took about 2 hours and works well (so far).

http://www.beer.org/gallery/Boler17-refresh/IMG_5470