Dometic fridge front panel

[Legacy Posts]

The front white panel on my Dometic fridge seems to have slipped down a bit. I now see a thin sliver of alumafoil looking insulation at the top, about 4mm of it. I tried to push the panel back in place, but it doesn't want to budge. Anybody else have this problem, and what did you do about it?

[Legacy Posts]

Robert
You should be able to remove a few screws at top end and remove or ajust front panel.I had mine out last fall when I painted it.:)

[Legacy Posts]

Robert:

Use a dull knife to slip between the top of the panel and the edge molding. Apply upward pressure on the panel while running the knife along the edge. Hold yur tongue right and it otta work. :)

[Legacy Posts]

:laugh :laugh :laugh

[Legacy Posts]

Ches got a kick outta that.

On my fridge the 'bottom' molding is removable. When the panel slides in you gotta help it that last 1/8" to get it past the lip of the top molding.

Guess they make em all different?!

[Legacy Posts]

A couple of plastic credit cards might help in guiding the ornery panel back in place.