Hooking up new LEDs??

[Timmy T]

I'm in the process of hooking up new LEDs. I'm assuming that I hook the yellow (auxiliary wire) to the tail (running lights) not the stop n turn? Please someone correct me if I'm wrong. Its a 1972 Boler.

[Roy in TO]

I'm in the process of hooking up new LEDs. I'm assuming that I hook the yellow (auxiliary wire) to the tail (running lights) not the stop n turn? Please someone correct me if I'm wrong. Its a 1972 Boler.

One can't assume anything based on colour alone. It may be original from a number of sources or have been rewired a number of times. The best way is to test it either with a spare bulb or circuit tester.
The wire for the running lights will go on and off with your headlights.

[james kent]

I'm in the process of hooking up new LEDs. I'm assuming that I hook the yellow (auxiliary wire) to the tail (running lights) not the stop n turn? Please someone correct me if I'm wrong. Its a 1972 Boler.

It sounds like perhaps someone has replaced the original wiring with a trailer, off-the-shelf wiring kit. In the Document Center, at the left under Resources, there are two 1976 Boler manuals. Neither one shows a yellow wire but does insicate what circuits are in a Boler. As Roy said... Use a circuit tester, or a meter, to check your wiring. Then keep a list of what you have for future reference.
Good Luck