I have a 13'
Scamp that currently has no
propane lines installed. I would like to install it myself but I am not sure where to go as I will have both low pressure (stove top) and high pressure (mr heater buddy) appliances that will run on the gas. I also need to drill a hole in the front
fiberglass and run the line to somewhere under the sink area. I am planning to use a flexible rubber hose for this run and then tee off for the appliances. The first thing I need to know is how to run the line through the front wall and how to seal the hole around it. I found the following product that will seem to work but I thought I would see what others have done.
Sure Marine Service, Inc. * Since 1972 * Marine Heating, Air Conditioning, and Galley Equipment
Thanks in advance for any advice. And by the way, yes I have read all the comments in other forums about how I should not do this myself so please no more comments like that.