Source for hitch coupling

[motorcarmike]

Hey all,

Does anyone have a part number for the proper A frame coupling for a boler 1300? I cant locate a place with the 30 degree couplings, only 50.

thanks
Mike

[floyd]

Are you shopping for 2" or 1-7/8"?
Would it be possible to just use a rebuild kit or parts from a new 50 degree or straight coupler? ( bolt, grip,and latch)

[motorcarmike]

Id like to upgrade it to a 2". Im actually building a new frame and need a new coupler. The old one is twisted from someone jackknifing it at some point and its too rusty to get a part number from. Its hard to find a 30 degree a frame coupler.

[floyd]

Originally Posted by motorcarmike

Id like to upgrade it to a 2". Im actually building a new frame and need a new coupler. The old one is twisted from someone jackknifing it at some point and its too rusty to get a part number from. Its hard to find a 30 degree a frame coupler.

don't know the angle, but the part # on my Scamp 13 is

[11-305 (sae cl1)

Maybe I'll try to measure the angle tomorrow.


While it is a 1-7/8", they have since switched to a 2"
I think the Scamp13 and 16 are now the same.
Suggest you call Scamp and talk to Parts or the frame shop.
They sell the coupler for $28. Their phone is
(800)346-4962
Can't hurt to ask
I don't know if this will get you another lead but it didn't take long for you to read this!
Anybody out there with a 16?
The part number is on top of the coupler just behind the latch