Trillium Dometic RM211 Parts

[Larry C Hanson]

Hello,
I have been working on my Dometic MR211 trying to get it running on propane.
It works fine on 12VDC and 110VAC so I assume the evap/cooling unit is good.
However, it does not get cold enough when running on propane.
The stack has been cleaned as well as the burner. I noticed that the manual calls
for a #14 bypass screw and there is a #17 installed.

Does anyone know a source for a #14 bypass screw?

Thanks, Larry H

[Dave Bese]

Bottom of page 6; see an RV dealer to order it

Dometic parts list

[ddionne]

looking for a burner assembly for my Dometic RM 211

[ddionne]

Also looking for a replacement cook top (2 burner) for my Trillium style kitchen.
something pretty basic is fine

[Rick G]

Originally Posted by Larry C Hanson

Hello,
I have been working on my Dometic MR211 trying to get it running on propane.
It works fine on 12VDC and 110VAC so I assume the evap/cooling unit is good.
However, it does not get cold enough when running on propane.
The stack has been cleaned as well as the burner. I noticed that the manual calls
for a #14 bypass screw and there is a #17 installed.

Does anyone know a source for a #14 bypass screw?

Thanks, Larry H

Have you checked your propane gas pressure? If it works well on electric, then your cooling unit is Ok. Fridges are very sensitive to having the right gas pressure. I did that on my previous trailer last year, in a thread described here: Trailer Fridge now Working Properly

Hope that helps.
Rick G