Waste Termination - No Holding Tank

[partslady9]

My 2001 16' Casita Spirit has a a broken 1-1/2" pipe roadside under the frame. My fix is to saw a clean cut, add a coupling then a new 1-1/2 piece up to where the smashed pipe hanger is (I have a new hanger) then add a slip elbow, 1-1/2" nipple & the 1-1/2 fitting w/blk cap w/3/4" M garden hose thread which I got from the factory.
I want to have the last fitting w/hose thread at a right angle to the Casita frame, not parallel to the frame.
Am I on the right fix here? (this is not in the A-Z book)
Thanks,
Elaine
(camped in the driveway)

[cpaharley2008]

pictures will help....

[Eddie Longest]

Elaine
I think I know what you are trying to do. I would add a valve in the line so any trap/trapped water won't rush out when you take the cap off to connect the hose. I switched from PVC (white) to ABS (black) pipe at the slip fitting. I added a 1.5" rv slide valve and a 1.5" to 3" rv sewer fitting. Then used a 3" RV sewer cap with a hose fitting. That way you can either use a 3" sewer hose or 3/4" gray water hose to dump with.
Eddie

[partslady9]

Great idea about adding the valve. You folks are always so helpful. I'll work on trying to get some pictures. Think my neighbor can help me with the photos-not my thing.
Thanks much.
Elaine

[partslady9]

Love that Amazon prime - should get the part by Friday. We are going to Santa Marie for rodeo hauling the parade car - Drat more lost trailer work time but the weekend should be fun.
Thanks again,
Elaine