Yards of material required for Trillium 1300??

[stefman]

Just wondering if anyone who has redone the interior walls of their trillium 1300 remembers how many yards of material (72" wide) they used to redo the inside of their Trillium 1300 ?? I want to order hullliner material from here :
Georgian Bay Ontario Canada - Sunbrella Boat Tops, Canvas Covers, Custom Biminis, Marine Upholstery, Boat Fabrics & Carpeting - JT's Top Shop=
and wanted to verify my measurements against someone else's.
Thanks in advance

stef

[Johnny M]

For our 13' Boler I came up with 252 square feet or 28 square yards to completely cover the inside from floor to ceiling all the way around, if you don't put it below the dinette seats or inside the cabinets, etc. and after figuring in for the windows & door we bought about 18 square yards. We haven't installed it yet but will within the next week or so, we went with a marine grade headliner from Hancock Fabrics at a really good price using their coupons and a sale on the fabric thanks to my wonderful coupon queen wife.

[slimmit]

I did my Boler with the headliner from Jt's earlier this spring and Bought 15 running yds, with a 60" wide headliner. works out to about 225 Sq ft. Only did top half then did hull liner on the bottom and miscelaneous areas. Check my album to see. Planned to do the whole thing but felt the colour was gonna show the dirt too much lower in the trailer.

[Keaner]

I'm in the process of doing mine now and I have 25yrds of the same material you are choosing. Looks like I will have a few yards left over.
Wait till you get to those inside corners...what a joy that is!!

[BruceC]

Originally Posted by Keaner

I'm in the process of doing mine now and I have 25yrds of the same material you are choosing. Looks like I will have a few yards left over.
Wait till you get to those inside corners...what a joy that is!!

So Keaner.... how DID you manage to get those corners done?? We're trying it with a foam backed vinyl and can't seem to get it to look "smooth" ... lots of wrinkles in it!

Bruce C.

[Keaner]

After much trial and error I got a pic of the inside of a scamp and cut it the same.
Make sure you get good glue as well. I used 3M77 at first and it failed. I switched to 3M90 and it's holding well.

[BruceC]

What are you using for headliner? The foam backed stuff we got just doesn't seem to work very well....

[Keaner]

I used Airfoil. It's like the refectix which is popular on the site. It's a 1/4 bubble wrap with foil on both sides.

[BruceC]

What are you using for the top cover? Rat fur or something else?

[Keaner]

It looks to me to be a commercial grade hull liner, although I'm not sure as a roll of it came with the trailer. It seems to be a popular choice.