boler name plate pics

[dmcclure]

Can anyone point me to a close up shot of the original Boler metal nameplates? Hope to get a couple custom made if possible.. tried the search but I haven't mastered that just yet.

Thanks
Dave

[Bill K]

Don't know if this is what you want or not, but here it is.

Bill K


Hi John,

Do you know where it was made, and what year it is alleged to be? My former 74 Boler had a front sticker like you describe that related to the propane certification. There was a data sheet on the inside of a cupboard door that had a bunch of information, including the serial number. The actual serial number was on a sticker on the outside of the trailer aft of the fridge and furnace vents on the driver side. Mine had been painted over, but I was able to expose it somewhat with paint stripper and care.

Since Bolers were made in at least three different factories in Canada from about 1969 to 1980 or later, and clones made in a couple of places in the US under various names, knowing where yours was made would be a good first step in figuring out the identification.

Here is a picture of a typical data sheet and the outside sticker from a Boler. Hope that helps.
Rick G Attached Thumbnails

Originally Posted by brabomb

Can anyone point me to a close up shot of the original Boler metal nameplates? Hope to get a couple custom made if possible.. tried the search but I haven't mastered that just yet.

Thanks
Dave

[dmcclure]

Hi Bill - maybe I used the wrong terminology.. actually looking for the logo itself, for the front and back of the trailer.. not the decals I have seen but rather that metal 'Boler' part

[Bill K]

Ok I understand.

Bill K

Originally Posted by brabomb

Hi Bill - maybe I used the wrong terminology.. actually looking for the logo itself, for the front and back of the trailer.. not the decals I have seen but rather that metal 'Boler' part

[Rick Mooyman]

My son is bringing my 71 Boler back tomorrow I will take the pics of the name plate you are looking for and post them on here tomorrow for you.

Rick

Originally Posted by brabomb

Can anyone point me to a close up shot of the original Boler metal nameplates? Hope to get a couple custom made if possible.. tried the search but I haven't mastered that just yet.

Thanks
Dave

[dmcclure]

Originally Posted by Rick Mooyman

My son is bringing my 71 Boler back tomorrow I will take the pics of the name plate you are looking for and post them on here tomorrow for you.

Rick

Hey right on! Thanks in advance!

[Rick Mooyman]

Originally Posted by brabomb

Hey right on! Thanks in advance!

[Rick Mooyman]

Did you ever get those moulds made for the emblems? There is a market for these emblems and maybe you can sell them if your interested. I would love to see a pic of the finished emblem. I see that another guy used the pic I posted for you to look for these emblems.

[Brian E Moon]

Count me in. I would buy a reproduction!

[TimR]

I would buy one as well! Maybe even two!