|
|
04-27-2008, 12:53 PM
|
#1
|
Senior Member
Trailer: 1983 13 ft Scamp
Posts: 3,082
|
I put a new axle in my 13' Scamp . (April 2008) Now the scamp won't fit in my garage. My solution is, to make some wheel dollies, so I can get the scamp in the garage, when winter comes back in the fall. I will use the lug bolts from the wheel hub to secure the wheel dolly. The trailer hub will be only about 1/8" off the ground. I will take off the rims,mount the dolly and push the Scamp into the garage.
This setup would be 3/8 ' to high
Web page --> http://www.northerntool.com/webapp/wcs/sto...0_212131_212131
I need all the room I can get to clear the top of the garage door.
|
|
|
04-27-2008, 01:33 PM
|
#2
|
Senior Member
Trailer: Scamp
Posts: 3,072
|
That's clever! I use a tireless, smaller rim, but it's higher than your rig.
|
|
|
04-27-2008, 01:41 PM
|
#3
|
Senior Member
Trailer: 1975 13 ft Trillium
Posts: 2,535
|
WOW Kevin THAT'S a sweet set-up have you got any dimensions ...like how thick the metal is and what size castore you plan to use?? I could REALLY get into this for when we sell and relocate!!!
|
|
|
04-27-2008, 02:18 PM
|
#4
|
Senior Member
Trailer: 1976 13 ft Trillium
Posts: 109
|
Kevin, that a clever solution. I am facing the same issue with our new Trillium. I'd love to be able to get it into the garage, but it's a tad tall.
You've given me food for thought - I've even got some heavy-duty caster wheels from an old job that might even do the trick. Hmmm...
|
|
|
04-27-2008, 02:21 PM
|
#5
|
Senior Member
Trailer: 1983 13 ft Scamp
Posts: 3,082
|
No dimensions yet, this will be a project for this summer.
Maybe use tubing 2"x 3" x 3/16" about 14" long. Wheels would be rated at 300 lbs each.( 4x300=1200 lbs total)
Maybe something like this, less welding involved.
|
|
|
04-28-2008, 02:40 AM
|
#6
|
Senior Member
Trailer: 88 Scamp 16 ft
Posts: 196
|
[quote]No dimensions yet, this will be a project for this summer.
Maybe use tubing 2"x 3" x 3/16" about 14" long. Wheels would be rated at 300 lbs each.( 4x300=1200 lbs total)
Attachment 12868
Maybe something like this, less welding involved.
Attachment 12870
Attachment 12871
Kevin
Find your caster wheels first. This will be the place you don't want to go cheap. Once you find the best casters you can, then build your rig around them. Looks like a good plan for a solution to dilema for many people. Mine was to build my garage with 10' doors, but I think your solution will be cheaper.
Added: After a re-read it looks like you may have allready found those casters.
|
|
|
04-28-2008, 04:14 AM
|
#7
|
Senior Member
Trailer: Play Pac ('Egg Krate')
Posts: 444
|
May I take these photo's to my local trailer guy? This may solve my storage issue.
__________________
Plotting my next adventures...
|
|
|
04-28-2008, 06:12 AM
|
#8
|
Senior Member
Trailer: 1974 Trillium 13 ft
Posts: 495
|
Here's my cheapo solution if your garage floor is fairly even and parking is fairly straight: Get yourself a few appliance roller sets and secure them onto a simple wooden frame made to the appropriate height. The plastic wheels are small but each single set is usually rated at over 1000 lbs! And at that price you can easily double or triple them up if you feel like it, or make additional frames.
Then back up trailer as far as possible, remove trailer wheels, lower the trailer frame onto the parallel caster sets, and push.
__________________
Driving on parkways and parking in driveways.
|
|
|
04-28-2008, 08:53 AM
|
#9
|
Senior Member
Trailer: 1975 13 ft Trillium
Posts: 2,535
|
Daniel, the problem with those is that they will only go forward n back, the swivel casters make for a much more mobile unit. I have used similar furniture movers (but in plastic) under my fridge and stove and found that they 'rolled over' VERY easy. It seemed even the smallest sideways movement made them buckle under. I guess these metal ones would be sturdier???
|
|
|
04-28-2008, 08:58 AM
|
#10
|
Senior Member
Trailer: 1983 13 ft Scamp
Posts: 3,082
|
Bonnie
Take any photos you want. If you get one built before I do --POST A PICTURE
|
|
|
04-28-2008, 09:08 AM
|
#11
|
Senior Member
Trailer: 1974 Trillium 13 ft
Posts: 495
|
Quote:
Daniel, the problem with those is that they will only go forward n back, the swivel casters make for a much more mobile unit. I have used similar furniture movers (but in plastic) under my fridge and stove and found that they 'rolled over' VERY easy. It seemed even the smallest sideways movement made them buckle under. I guess these metal ones would be sturdier???
|
My solution is what it is, a cheapo solution, but it does the job if you don't intend to roll around the garage and just need straightforward parking though a low garage door. The key is to bolt them onto some sort of wooden structure so they stay put and remain parallel to each other.
__________________
Driving on parkways and parking in driveways.
|
|
|
04-28-2008, 02:43 PM
|
#12
|
Senior Member
Trailer: Scamp 16 ft Side Bath
Posts: 705
|
Wow, Kevin - this is a terrific idea! When we had our home, we were blessed to have a 10-ft high door so getting our Scamp 13 (no A/C) into winter shelter was easy. If we ever build again, we will be sure to include the extra-high door(s), but this gadget will no doubt be helpful for lots of "Eggers".
Thanx, L 'n D
__________________
“Imagination is everything. It is the preview of life's coming attractions.” A. Einstein
|
|
|
04-28-2008, 06:50 PM
|
#13
|
Senior Member
Trailer: Bigfoot 21ft (25B21RB)
Posts: 752
|
subscribed to this thread...
some excellent ideas going on in here...
__________________
Phil & Denise Underwood
1973 13ft Lovebug
1998 17ftCasita FD
|
|
|
04-29-2008, 01:36 AM
|
#14
|
Senior Member
Trailer: Play Pac ('Egg Krate')
Posts: 444
|
Quote:
May I take these photo's to my local trailer guy? This may solve my storage issue.
|
Don't think I'll beat you to the project. Local trailer guy says $60 hr and materials. Wasn't too enthused with the idea. Suggested 8" or 10" rim/tires. That might work too. But wouldn't give me the ability to move the egg sideways.
I haven't given up. I know a couple of iron workers who might take the project on. Hmmmm.
__________________
Plotting my next adventures...
|
|
|
04-29-2008, 07:29 AM
|
#15
|
Senior Member
Trailer: 1972 Boler American and 1979 Trillium 4500
Posts: 5,141
|
Quote:
Local trailer guy says $60 hr and materials. Wasn't too enthused with the idea. Suggested 8" or 10" rim/tires. That might work too. But wouldn't give me the ability to move the egg sideways.
|
How about cutting a rim in 1/2, then welding a plate on the flat part on either side where the tire goes to mount the dolly wheels to? If you are feeling rich, you could use 2 rims cutting off less so you could mount it with all the mounting bolts.
I'm not to good with making pictures but if you can imagine the box like strucure as a rim cut flat on the bottom you get the idea.
|
|
|
04-29-2008, 07:45 AM
|
#16
|
Senior Member
Trailer: 1981 13 ft Scamp / Nissan Titan
Posts: 1,852
|
Don't think you would need to build it, there are all kinds of automotive dollies out there.
Here is one example that has the ability to go in any direction. Could probably work with the tires off around the hub.
gojack
|
|
|
04-29-2008, 07:51 AM
|
#17
|
Senior Member
Trailer: 1972 Boler American and 1979 Trillium 4500
Posts: 5,141
|
Quote:
How about cutting a rim in 1/2, then welding a plate on the flat part on either side where the tire goes to mount the dolly wheels to?
|
On second thought one could get a larger rim that has been damaged from a wreckers or ???
Cut it in half and drill holes to match the bolt pattern. The larger rim, would allow the castors to be placed further from the hub. You don't need the rim to be true since it won't be rotating and it does not need to hold air.
|
|
|
04-29-2008, 08:13 AM
|
#18
|
Senior Member
Trailer: 1983 13 ft Scamp
Posts: 3,082
|
Roy in TO
Something like this?
Wheel is white in photo. cut bottom part off.
|
|
|
04-29-2008, 08:18 AM
|
#19
|
Senior Member
Trailer: 1974 Trillium 13 ft
Posts: 495
|
Hmm... for argument's sake, what would be the implications if one was to just wrap some padding around the hubs (rubber, leather, or something) and use them as wheels on that (very) short distance? Or simpler yet, lay out something on the floor such as plywood or cardboard. Then you might be able to move the trailer back and forth and steer it into place if you need sideways movement to reach your final storage spot. (Just thinking out loud... I don't mean to interrupt.)
__________________
Driving on parkways and parking in driveways.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
Boler in a garage?
|
Bobbie Mayer |
Problem Solving | Owners Helping Owners |
21 |
08-02-2009 08:01 AM |
Garage door
|
Lainey |
Problem Solving | Owners Helping Owners |
6 |
08-18-2007 12:25 PM |
Portable Garage
|
Cheryl C |
Care and Feeding of Molded Fiberglass Trailers |
22 |
04-21-2007 10:17 AM |
Do eggs fit in your garage?
|
Clint |
Problem Solving | Owners Helping Owners |
11 |
07-23-2006 01:19 AM |
Need to Fit Garage Height
|
Legacy Posts |
Problem Solving | Owners Helping Owners |
9 |
08-21-2003 02:26 PM |
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
» Upcoming Events |
No events scheduled in the next 465 days.
|
|