Replacing Atwood stabilizers

[Kip in Mi.]

For those of you who have replaced the Atwood stabilizers with Bal did you use the 17" or 20" and what is the difference between the two? Thanks Kip

[DaMScampers]

Subscribing to this thread... Very interested in what you find out.

[Roy in TO]

Originally Posted by Kip in Mi.

... did you use the 17" or 20" and what is the difference between the two? Thanks Kip

About 3",
It would be the amount of lift or height required. The 23026 kit (20") manual says it's good for up to 14" from frame to ground.
http://norcoind.com/bal/downloads/ma...ing%20Jack.pdf

But this literature says it is 19"
http://norcoind.com/bal/downloads/af...ng%20Jacks.pdf

And this says it is good for up to 16" of frame to ground clearance.
BAL - Innovative Products for the RV Industry

So you have me wondering Kip, I've contacted the manufacturer and will post what I find out.

[Kip in Mi.]

Thanks I will wait to here from you. I talked to someone at Bal today and I am still a bit confused ,but I think for our application the 17 will be ok. Kip

[Roy in TO]

I don't expect a response from BAL over the weekend.