I used wing nuts, and in larged the holes for a 3/16 wing nut size, I think it is 1/2", but the bolts can only be about 1 1/2" long so they do not hit on the in side skin, other than that 1-4' x 2"x2", and 1-4' x 1 1/2"x1 1/2". That gave me enought room to clear the seam.
I alo used double sided 3M tape to make up for the slope of the roof, then caulk around the bottom
I also used three of the old holes for one side and then drilled three new ones as this one is wider than the old mount
Is it adjustable? I went on Amazon and couldn't find where it says anything about being adjustable. The controller I have now floats at too high a voltage.
Looks like a good buy on that panel (if it is also Ramsond). $2.80 a watt is a fairly good price.
No it is not ajustable, I payed 139.00 for the 50 Watt panel and the controler cost another 10.00, free shippingI had it sent to Kansas, to mount on trailer.
I bought it on E-bay
Little bit of Heaven
Casita
P-eggy
Linear Mode
