I decided to add a shelf behind the sink and stove on my
UHaul. The
Burro is so similar that I'm sure the same technique would work. In a
previous post, I showed my overhead shelves.
I decided to continue with this theme using 3/16" underlayment for the shelf painted with exterior grade mildew resistant enamel colored to match the gel coat. The framing is L shaped extruded aluminum with an anodized finish (see cross section in photo).
The shelf is supported with aluminum L brackets attached to the wall with 3M VHB tape.
- The first picture shows the shelf in place.
- Second picture shows shelf from angle view.
- Third picture shows the topside.
- Fourth picture shows the bottom side.
- Fifth picture shows the shelf cross section.
- Sixth picture shows the mitered corner that allowed the aluminum to be bent into a corner.