Originally Posted by Carol H
Paul I am intreasted in this. My question though is in regards to the Scamp
trailer coupler profile and what is stock on my trailer. Mine is welded to the frame and the coupler section of it that is welded on slopes down a great deal at the front. The replacement ones I see in the RV stores don`t slope down like mine. Is mine normal and did the one you use have that same slope to it.
I'm not sure I know what slope you mean. The stock coupler on my Scamp
was bent when the previous owner drove off with the jack partially down.
When I had the new coupler installed, it didn't seem to affect the level of the trailer when hitched (I didn't change the drawbar) so I don't think there was much difference.
I sold the Scamp
, so this is the only picture I have of the coupler (If I ever replace the coupler on our Escape
, I'll use a Bulldog).