Boler 13' Front bunkbed - Fiberglass RV


 
 
Thread Tools Search this Thread Display Modes
 
Old 07-24-2012, 06:05 PM   #1
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
Boler 13' Front bunkbed

Hello,

FOR FREE to a good motorhome

I have the fiberglass panel that is the front bench of a 1974 Boler.
I also have the backrest which flips up to become the upper bunk.
Additionally I have the support bars that hold the bunk in place.
I do not have the lower front seat cushion.
If I were keeping this stuff, I'd recover the dirty plaid fabric of the backrest.

Note that these things are nearly six feet long. I don't want to ship them, I'm sorry to say. But I would hold them for some good time for a plan to be made to pick them up in San Jose California
__________________

__________________
Thomas Haney is offline  
Old 07-25-2012, 05:25 PM   #2
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
I found the cushion for the lower seat now! I thought it was gone.
but it's also part of the deal
__________________

__________________
Thomas Haney is offline  
Old 08-01-2012, 11:12 PM   #3
Junior Member
 
Name: stephen
Trailer: 73 Boler
New York
Posts: 9
hi thomas,
i have just joined this forum and have just picked up a 1973 Boler + it is missing the support bars. i am in new york state, so a very long way from san jose... i would love the bars if you were into just them. i could send ups over + prepay it, but this really depends upon your kindness. thanks very much!
stephen
__________________
boler boy is offline  
Old 08-02-2012, 09:40 AM   #4
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
Hello Boler Boy
At the moment, I'd like to wait to see if someone wants all of the front bunk equipment in a batch. If someone wants my bunks and cushions, it would be a shame if they didn't get those support bars too.

If nobody wants this stuff after a while, you're first in line for the bars

Tom
__________________
Thomas Haney is offline  
Old 08-02-2012, 11:35 AM   #5
Junior Member
 
Name: stephen
Trailer: 73 Boler
New York
Posts: 9
thanks very much, i would need the base as well, but as i am in the north east, it was too much of a hassle to even ask for the other pieces. if nobody claims them, i would only be too happy for the posts.
best,
stephen
__________________
boler boy is offline  
Old 08-02-2012, 12:03 PM   #6
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
I wonder if someone is going to be passing my way on their trip your way.
I've had heavy machines moved across the country via this kind of kindness.

I wonder if we might be able to setup a forum subdivision called "passing your way" where people might post their need and others might check it just in case their trip follows one of the paths of need.

Just wondering....
because it would be great to get you this stuff
__________________
Thomas Haney is offline  
Old 08-02-2012, 02:03 PM   #7
Senior Member
 
Roy in TO's Avatar
 
Name: Roy
Trailer: 1972 boler American and 1979 Trillium 4500
Ontario
Posts: 4,954
Quote:
Originally Posted by boler boy View Post
it is missing the support bars. stephen
Check the length you need, the ones from Scamp should work @ $25.00 + shipping / pair.
Bunk Post


Quote:
Originally Posted by Thomas Haney View Post
I wonder if we might be able to setup a forum subdivision called "passing your way" where people might post their need and others might check it just in case their trip follows one of the paths of need.
Great idea Thomas, I've done a few times here. Sometimes even pony express style, from one person to the next much like people do with rescue dogs.
__________________
Roy in TO is offline  
Old 08-02-2012, 02:04 PM   #8
Senior Member
 
Name: Alan
Trailer: 2000 17' Casita Freedom Deluxe...Tow vehicle 2015 Toyota Tacoma Dble Cab V6 Prerunner
California
Posts: 831
front bunk setup

I'm very interestedin these. My son lives in Santa cruz,ca. and would be able to make the pickup . Do you know it these would fit in a perris pacer ?...or could you possible provide some measurements ?

__________________
alan H is offline  
Old 08-02-2012, 04:06 PM   #9
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
Alan,
As we discussed, these are now yours to make fit anyhow you can manage.
Little cuttin' little gluin, little covering up mistakes and it will be good as new.

I did not make any measurements of these things thinking that they will go to a good home in a similar beast. Measuring rounded items is susceptible to error. So I don't have measurements.

And another good thing is the ease of transferring them to a third party who lives near me and will go down toward you. No shipping!!!!
Gotta love it.

Good Luck Alan
__________________
Thomas Haney is offline  
Old 08-02-2012, 06:56 PM   #10
Senior Member
 
Roy in TO's Avatar
 
Name: Roy
Trailer: 1972 boler American and 1979 Trillium 4500
Ontario
Posts: 4,954
They should fit fairly close if not the same. The Perris Pacer may have come from early boler American molds. The bodies were the same, not sure if the benches and cabinets were. You will have to post your results Alan.
__________________
Roy in TO is offline  
Old 08-04-2012, 10:19 PM   #11
Junior Member
 
Name: stephen
Trailer: 73 Boler
New York
Posts: 9
i realize that the bottom fiberglass bunk was cut apart to allow for a little toilet to fit. it is something that i really don't think that i need and am looking for a complete piece of fiberglass... so any leads would be great.. also need the 2 bunk support posts...

the wooden brace that support the bunk is not in great shape, any suggestions on how to put a new one in?

thanks,
stephen
__________________
boler boy is offline  
Old 08-05-2012, 09:23 AM   #12
Senior Member
 
Roy in TO's Avatar
 
Name: Roy
Trailer: 1972 boler American and 1979 Trillium 4500
Ontario
Posts: 4,954
There are different front bench seats depending on when and where your trailer was made. A picture would help find what you are looking for.

If you are talking about the pressed wood that is just below the window, you can replace it with a new piece of real wood. Either glass it in or use something like the 3m marine adhesive 4200 mentioned elsewhere here in the forums.
__________________
Roy in TO is offline  
Old 09-08-2012, 06:54 PM   #13
Junior Member
 
Name: Suzy
Trailer: '74 Perris Pacer
California
Posts: 20
Hi,

Is this still available? I'm down in the L.A. area, but my family is up in the Bay Area , and I've been wanting to take a little trip up there anyway!

Just let me know. Thanks!
__________________
Suzy I. is offline  
Old 09-09-2012, 12:44 PM   #14
Member
 
Thomas Haney's Avatar
 
Name: Thomas
Trailer: 1976 Scamp 13 ft
California
Posts: 65
Sorry,
as mentioned above, everything has been spoken for and picked up already.
__________________

__________________
Thomas Haney is offline  
 

Tags
boler


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
BC | 19' Bigfoot Bunkbed Model BC_Moore Classified Archives 1 06-09-2011 12:34 PM
Front and rear windows for my boler Frenchey3fity Modifications, Alterations and Updates 5 05-19-2011 07:16 AM
bunkbed measurements Perry Mac Donald Problem Solving | Owners Helping Owners 2 05-27-2009 07:29 PM
bunkbed modification Ginni Modifications, Alterations and Updates 7 06-28-2006 10:31 PM

» Upcoming Events
No events scheduled in
the next 465 days.
» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 09:37 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.