Fiberglass RV - Sue and Henry's Album: Work on Bennie the cracked egg

Work on Bennie the cracked egg
Day one progress. I have no idea how I am going to slip the plywood back under the bench when I get all the rotten stuff out - but I plan to use...
This shows the back bench section and just how rotten the plywood is.  At least it comes up easy.  That is not a good thing unfortunately.
I purchased a universal tool to cut the top layer of fiberglass exposing the rotten wood.  Unfortunately is is more extensive than I expected.  It...
I discovered a large spongy area under the back area of my burro floor when I removed the bed set up for the electrician to have access.  1. linoleum...
Thick aluminum was cut to insert into the door to support the hinges. This stuff was about an inch thick. The door was cut at the edge side to allow...
When the old lock was removed, the damaged door was reinforced with fiber and resin layers and remanded for a smooth surface.  It needed multiple...
After the aluminum was inserted and the fiberglass repair complete, we drilled the holes for the hinge screws and used a threading bit to make the...
This is at the Shasta McDonalds.
Roger and Greg attempting the door repair.  Duct tape is our friend.
The home made shade and pipe solution!
image 413000351
image 2300464166
image 3848151560
image 1020686819
image 3089575991
image 3050135089
image 92370223
image 3192116410
image 3264813457
image 3035203974
image 3466747874
image 4084152447
image 2733979086
» Upcoming Events
No events scheduled in
the next 465 days.
» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 11:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.