I'm guessing you painted this. What paint did you use? It looks great!

My husband got the paint at the local paint store because I was having trouble getting the right yellow. None of the big box stores could mix it. It didn't even have a label but it was a outdoor oil basd paint. I only bought a quart but I would suggest two quarts.

To prep I filled all the holes from hardware with job weld because I was afraid bondo would pop out of the little holes. Then I put a coat of the stuff you use after bondo to fill the pinholes. Sanded and wiped it all.

To paint I added penetrol to the paint. This is really important since it makes the stroke
marks lay down. You can even buy it at lowes. I rolled with a small foam roller and "tipped" after each roller full. There are lots of videos about rolling and tipping online and ar usually for fiberglass boats. I used a foam brush to tip. Hope that helps.