Fiberglass RV

Fiberglass RV (http://www.fiberglassrv.com/forums/)
-   Problem Solving | Owners Helping Owners (http://www.fiberglassrv.com/forums/f55/)
-   -   Need window cranks!! (http://www.fiberglassrv.com/forums/f55/need-window-cranks-58187.html)

FRED SMAILES 05-08-2013 01:05 AM

Need window cranks!!
 
Hey people, just starting my search for a supplier of window cranking mechanisms for the rear side windows of my '74 Boler 13. Any leads would be greatly appreaciated.
Fred

Raz 05-08-2013 03:24 AM

I've seen generic crank mechanisms in RV catalogs and Hehr sells replacements for there windows. Also Vintage Trailer Supply might be worth a look. Can you post a picture or the brand? Raz

http://www.vintagetrailersupply.com/...dware_s/27.htm

Maybe this one?

http://www.vintagetrailersupply.com/..._p/vts-582.htm

mary and bob 05-08-2013 05:44 AM

I've seen them in my local Ace Hardware store.

kootenaigirl 05-08-2013 08:56 AM

These are the ones I got (if you mean this part) and they worked on a 75 Boler.
Boler Torque Bar Window Operator

Just saw Raz had posted the same link - it's first thing in the am, I'm a little slow!

FRED SMAILES 05-08-2013 11:31 AM

Thanks!! I used to have Vintage on my computor favorites till it crashed!!
I've ordered 3 (a spare) good price and word of mouth.
I'll post how I managed to remove the cranks without removing and disassembling the window. with pictures once I get the new cranks to install.
fred

Otters 05-08-2013 03:22 PM

Ace has them here in California too, but don't know if they're in Canada. Also, many mobile home supply stores have them too. Of course ordering over the internet is the easiest route. Good luck.

FRED SMAILES 05-28-2013 12:20 AM

Hey Guys, I received and installed the mechinisms to open the windows.
I put together a good pictorial in the thread "Theres a hole in my Boler"
in the Mod section post #119. This is easier than redoing the post here.
Although it is a slight mod, it's also a great problem solver. I never looked around the site this may be old news but saved me alot of work.
Fred

Mike Magee 05-28-2013 08:07 PM

I'm sure I could act cranky about your windows if I put a mind to it... :loltu ...always glad to help out! :D


All times are GMT -6. The time now is 10:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.