Hey All... so we've just started pulling things apart and I'm just going to do some quick touch-ups and cosmetic fixes before a big holiday coming up.
Here are my issues/questions.
1. We have a small electric
fridge that we _could_ replace our
propane fridge... only I believe we will not be long in any sites that offer
electrical service so we would have to run it off a
battery for the most part. I am so clueless about how quickly this little
fridge would suck the juice away. Is
solar an option here? Should I just go with the
propane if it will work? (less hassle/better anyway?)
2. I took the belly band off because it was layered with about 3 tubes of caulk and it's also broken in places. Does anyone know where I could find a replacement? It's black, about 2.5-3 inches wide and has a "chrome" strip down the middle which is actually plastic. I would consider doing something alternative (like the
scamp chrome if it'll work)
3. The grey plastic piece inside the front/back plexiglass
windows (I can take a picture) seems to be shrinking away from the corners and there is about a .5 inch gap at the top. I believe it used to fit at one point, now they have just gooped caulk into the corners and it looks horrible. I would like peel out the caulk and replace the trim or seal or whatever it is. I think I heard something about boiling the pieces to re-stretch them? I don't know if this is an option here or not.
That should be a good start! Of course we have other issues so it's not like this will be the last of it.... we have barely begun to peel away the layers of 'wtf did they do that for!?'.