Quote:
Originally Posted by CharleyWhiskey
I brought my next question to the Scamp Plumbing forum thinking I was drawing this thread off topic, but I don't think that thread's been used for a while. How does one do a full hookup with a scamp 16 with a bathroom ?
|
As Donna said, ALWAYS keep the black water valve CLOSED except when dumping.
For full hookups we usually hook up the black water to the sewer with an elbow which has a garden hose fitting on the other side which is hooked to the open graywater tank through an adapter cap.
Shore water is hooked up through a filter and a pressure regulator.
The filter is more to keep our trailer system clean than any other reason.
The regulator is to protect the trailer system from damage from over pressure.
Electricity is hooked to shore power through a 30A detachable cord when 30A power is available. We do carry 15A/20A adapters (both ways) and a 12GA extension cord.
One odd thing...
We have a plastic sewer fitting which seals to the sewer opening, but we have found many places which arbitrarily require a soft foam seal at the sewer. Its a bit clumsy and works no better, but we carry one just for that contingency!