Fluorescent Light Lens Cover - Where to Buy? 93 13 ft Scamp

[barryra]

In my 1993 13 foot scamp the lens cover for the forescent light fixture above the sink is very yellowed. I couldn't find it on that Scamp webpage parts list. Would anybody have an idea of where to find this cover? Thank you

[Dan Meyer]

They (at least used to) sell the complete fixture at Home Depot. It should be pretty cheap.

--Dan Meyer
http://scamp.n0kfb.org/

[J Ron]

Replace it with a LED fixture.

[sharpstick]

Originally Posted by barryra

In my 1993 13 foot scamp the lens cover for the forescent light fixture above the sink is very yellowed. I couldn't find it on that Scamp webpage parts list. Would anybody have an idea of where to find this cover? Thank youAttachment 118777

You didn't say whether it's 110v or 12v. I would just replace with LEDs. I was considering wiring more 12v lighting in my scamp, but realized that battery powered LED lights would be easier. I got several of the ones that look like a house light switch with LEDs on the sides. $5 to $10 everywhere. I even got some with a dimmer. I put hook velcro on the back and they stick to the ratfur walls and ceiling. Easy to pull off and carry around, too. Some of them are plenty bright enough to use under the counter. I think they all have magnets on the back, too.

[J Ron]

if the light is a c replace it with an LED bulb.

[barryra]

Thanks for the replies... great ideas & comments. I really appreciate it.

[Ev in Oregon]

Originally Posted by barryra

In my 1993 13 foot scamp the lens cover for the forescent light fixture above the sink is very yellowed. I couldn't find it on that Scamp webpage parts list. Would anybody have an idea of where to find this cover? Thank youAttachment 118777

Barry, if you haven't already found a solution, there's a miracle worker here on the forum that you might consider contacting:

Fiberglass RV - View Profile: tractors1

Charlie helped me in 2013 by fabricating a new "porch light" cover for my 1988 Bigfoot. I wanted it to look like the original one. He did a first-class job, & for a very reasonable price. Oh, and did I mention, he was easy to work with and manufactured the cover really fast!