|
|
09-21-2013, 01:24 AM
|
#21
|
Senior Member
Trailer: 2017 Escape 19
Posts: 353
|
what style
what style doors are these? do you have an order number I can reference?
|
|
|
09-21-2013, 08:21 AM
|
#22
|
Senior Member
Name: Ted
Trailer: (Dark side)Crossroads Now
Glade Valley, North Carolina
Posts: 990
|
Great looking doors. I just hope my DW don't see this post. Ha Ha
__________________
“I have tried to live my life so that my family would love me and my friends would respect me. The others can do whatever the Hell they please!” —John Wayne
|
|
|
09-21-2013, 07:36 PM
|
#23
|
Senior Member
Name: kootenai girl
Trailer: 1976 Trillium 1300
British Columbia
Posts: 1,411
|
They were Shaker select red oak, sorry don't have an order #.
|
|
|
07-17-2015, 11:31 AM
|
#24
|
Member
Name: Jameson
Trailer: Scamp
California
Posts: 32
|
I tried to make an order like yours, but some of the sizes I measured from the scamp are too small for their minimum specs, for example the long and narrow cabinets in the front and rear upper storage areas are 36x6" and the minimum on the site is 7.5"
Similar issues with the drawer front underneath the stove.
Did you run into this issue when you ordered a couple of years ago?
|
|
|
07-17-2015, 11:49 AM
|
#25
|
Senior Member
Name: kootenai girl
Trailer: 1976 Trillium 1300
British Columbia
Posts: 1,411
|
Just pulled out my old order and you are right they seem to have changed the sizes you can do.
On mine for the long narrow ones I ordered 35.5x6.5 and the drawer front was 18x4.
I guess you could call and ask them what the scoop is. That's a pain if you can't get them though as I really liked them.
Let us know how you make out.
|
|
|
07-17-2015, 12:22 PM
|
#26
|
Commercial Member
Name: Mike
Trailer: Boler13/trillium4500/buro13
Ontario
Posts: 1,138
|
Quote:
Originally Posted by Bob Miller
My local IKEA store just had about 50 solid wood cabinet doors and matching drawer fronts in the "As-Is" department for $1.50 to $4.00 each. Never can tell what you will find at IKEA.
|
I've refinished all my trailers with ikea clearance doors the trick is to buy there euro handles that run the entire length of the door so when you cut the doors to fit, the handles will cover your cut edge and you do not have to refinish the edge. Handles and doors less than 50 bucks for each trailer
|
|
|
07-17-2015, 12:34 PM
|
#27
|
Senior Member
Trailer: Class A Motorhome
Posts: 7,912
|
After writing that comment about IKEA, and after at least 10 good years of bargains in the as-is room, they seemed to have taken a different tact in the as-is room this past year.
Gone are the real bargains, most stuff is marked down less than 40-50%, the Fabric bins have been reduced in half and the no-returns policy still holds. As a result they have stacks of returned mattresses and lots of odd looking furniture that no one buys.
I have been in IKEA stores from San Diego to Seattle in the past 6 months and it's the same in all of them. No mo' real bargains in the as-is room. Bummer....
|
|
|
07-17-2015, 12:52 PM
|
#28
|
Member
Name: Jameson
Trailer: Scamp
California
Posts: 32
|
Thanks for the input. Searching around online it looks like I will be able to find one that will make the smaller dimensions. I just found a site that would take the dimensions and had similar prices however the shipping was going to be $110 to Cali. I'll have to keep searching around...
|
|
|
07-17-2015, 12:58 PM
|
#29
|
Senior Member
Name: Dennis
Trailer: Scamp
Minnesota
Posts: 409
|
Those doors look good! I built my own out of Cherry. By the time I bought the solid Cherry for the rails and Styles, and the plywood for the panels, I really didn't save much over the price you got! Good show! I did discover that they are actually a little bit lighter than the originals.
__________________
2021 Nissan Pro 4X. 2020 Scamp 19’ Deluxe.
|
|
|
07-26-2015, 06:25 PM
|
#30
|
Senior Member
Name: John
Trailer: 2000 16ft Scamp
Minnesota
Posts: 189
|
curious
When I logged on to Cabinet Mart I noticed their cabinet covers where 3/4" thick, did that thickness work for you? Also it looked as if their minimum width was 7". Five of my cabinet doors are 6.5", did you make the 7" work. Looks great!
Thanks,
John
|
|
|
07-26-2015, 09:01 PM
|
#31
|
Senior Member
Trailer: 13 ft Scamp
Posts: 1,773
|
I was just in denier and stopped at an ikea store in centennial
They still have a huge "as is " section
Sent from my iPhone using Fiberglass RV
|
|
|
07-26-2015, 10:47 PM
|
#32
|
Senior Member
Name: kootenai girl
Trailer: 1976 Trillium 1300
British Columbia
Posts: 1,411
|
John, see post 25, it looks like they have changed their minimum sizes
|
|
|
08-02-2015, 04:33 PM
|
#33
|
Member
Name: Jameson
Trailer: Scamp
California
Posts: 32
|
I just made my cabinet door mart order. I found a way around the new minimum sizes...you can order "solid drawer front" in 36x6" or in smaller sizes than the shaker cabinet door sizes and it will all match. In the original post of this thread you can see an example on his drawer. That is how my 36x6" cabinets above the dinette and bench will look as well.
I'm glad I figured out a way to make it work because the best thing about cabinetdoormard.com is the free shipping. At an order total of $206 it was nearly $100 cheaper than other sites where shipping was always around $50-$100.
Will post pics once they come in---
|
|
|
08-02-2015, 07:45 PM
|
#34
|
Senior Member
Name: Steve
Trailer: Escape 5.0 TA
Pennsylvania
Posts: 231
|
Cabinet door options
This looks like a great choice for those of us that are not cabinet makers. I need to get rid of the Casita MDF and the push button latches!
|
|
|
08-02-2015, 07:53 PM
|
#35
|
Senior Member
Name: kootenai girl
Trailer: 1976 Trillium 1300
British Columbia
Posts: 1,411
|
Good fix, make sure to post pics when you are done
Steve - I always look at the Casita doors too but there is so many of them it is kind of daunting!
|
|
|
08-03-2015, 05:57 AM
|
#36
|
Senior Member
Name: Tim
Trailer: '88 Scamp 16, layout 4
North Florida
Posts: 1,547
|
Quote:
Originally Posted by starbrightsteve
This looks like a great choice for those of us that are not cabinet makers.
|
I am not a cabinet maker, but am a Carpenter who took cabinet making classes at the VoTec school and have all the equipment to do it. I would not buy the material and even try to do it for these prices!
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
» Upcoming Events |
No events scheduled in the next 465 days.
|
|