Advice, please

[gailanneM]

I am breaking camp to leave at 9am.

This is my first time with my new-to-me Burro & things are going very well .... Until I try to swing the back bumper stabilizer jack things back up into the bumper.
I released the pressure in the front & cranked it down, then pushed the spring-release for the feet. They go up easily.
I know the whole contraption goes up in line with bumper & clicks to hold it in place while driving.
For the life of me, I cannot find a release or anything to make it all go UP.
Any help from anyone out there?

[Thomas G.]

Originally Posted by gailanneM

I am breaking camp to leave at 9am.

This is my first time with my new-to-me Burro & things are going very well .... Until I try to swing the back bumper stabilizer jack things back up into the bumper.
I released the pressure in the front & cranked it down, then pushed the spring-release for the feet. They go up easily.
I know the whole contraption goes up in line with bumper & clicks to hold it in place while driving.
For the life of me, I cannot find a release or anything to make it all go UP.
Any help from anyone out there?

If I understand what you have, you need to pull down on the whole leg, then pivot it toward the bumper.

[gailanneM]

EUREKA!! That worked like a charm!! Thank you so much!!!
I do NOT know what I would do without this FGRV community...,,
Again, many thanks!!

[Kevin K]

Right stabilizer pull to the left and swing up
Left stabilizer pull to the right and swing up
Both right and left should catch in a notch to hold them up.
Good luck.

[Brian B-P]

Three-minute response time with the right answer - pretty impressive, Tom.

[Spanke]

Originally Posted by Brian B-P

Three-minute response time with the right answer - pretty impressive, Tom.

Agreed!

Spanke

[Thomas G.]

Originally Posted by Brian B-P

Three-minute response time with the right answer - pretty impressive, Tom.

I'm a slow typist.