The spring-loaded pins which secure the rock guard on my B1700 look like the ones on the
Escape, except that on the Boler they are mounted in the guard edge, and poke into a fixed bracket, while on the
Escape they are mounted on a fixed bracket, and poke into the slot which is visible on the edge of the guard.
(I left the photo showing a large area for scale - the pin is in the lower left corner at the strut mounting bracket.)
One of my pins needs replacement, as well. The housing is still there, but the pin and spring are missing, so the previous owner stuck a bolt in (which sort of works).
Maybe someone recognizes this part from the photo?