Floor plug table leg

[AmyFL]

Hi - I installed a Lagun table leg, so I no longer need the pole that held up the table on my Casita Independence (I only used one). Does anyone know where to buy some type of plug - so there is not a “hole” in the floor? Thank you! Amy

[Larry C Hanson]

Hi Amy,

Maybe your request for ideas would lead to more informed
responses if you include a photo of the hole showing the
present floor covering.

Good Luck,

Uncle Larry

[Jon in AZ]

Originally Posted by Larry C Hanson

Hi Amy,

Maybe your request for ideas would lead to more informed
responses if you include a photo of the hole showing the
present floor covering.

Good Luck,

Uncle Larry

I think she means the recessed base for a standard pedestal table.


When I was searching I did find some images of covers but I was unable to locate a good source. This is the basic idea, but it’s from the UK. Surely there must be something available in the US.
https://www.sheridanmarine.com/produ...ase-cover-grey

Hopefully someone a bit more adept at internet searches can turn something up.

[steve dunham]

I made one out of a piece of oak using a hole saw ,some sand paper and a rubber mallet .
It fits in the hole snuggly but can be removed if things change

[Bob & Jackie C]

Originally Posted by AmyFL

Hi - I installed a Lagun table leg, so I no longer need the pole that held up the table on my Casita Independence (I only used one). Does anyone know where to buy some type of plug - so there is not a “hole” in the floor? Thank you! Amy

Picture of post base

[tua]

This might work.

https://www.acehardware.com/departme...e-pads/5090949