[attachment=2877:attachm
ent]
OK I have started to take apart and to replace things on my trillium1300 1979. I first took the little tray above the table and made a nice pine piece in there since the orig. piece of particle board was peeling with its stick on cover. That turned out pretty clean. A little dangerous since I used my table saw to route the grove where the rubber edging goes, but my fingers are in tack.
I also replaced my drain on my plastic water tank and made sure the new hose I added went through the bottom and drained outside, not on the inside of the tub. I set it and it fills and drains nicely. Funny Story,
when I went to the outside of the trailer to stick the hose in the hole, I was surprised to see that the thing covering the hole was a cork. I had quite a good laugh. Needless to say, I think the whole water tank thing for me is just for cleaning and washing. NO DRINKING WATER FROM IT.
I also got a new pair of table brackets from a very nice man that had some to sell. I mounted them today and they work great. Thanks Gene Graff.
OK So what do I need.
I am going to put the regular hand water pump back up on the sink.. SO does any one have one of them. Here is the hole that it came out of. Again it is for a trillium1300.
I also need a cabinet handle. The pull side plastic insert is broken. Here are two pics of what I am talking about.
I also need one more window cranks and two screws for putting this one in and a new one I hope to get. So anyone with some parts that they have available, please sell them to me. I know that someof you have taken out your handpumps water faucet and put in 12v ones. I am going basic so I need you old on that works.
Thanks for any help you can give me.
Rickster