Need Help finding three moldings

[Borden]

Molding for center section of front window, and lever part need a pin other side pin is removable and is sheared in half on this side
Top is top left, middle is the very small top right picture and the bottom left is bottom molding the leaver Model Number: H010-210 Hehr (Deco) Torque Bracket only need a pin as bracket ok. Also need Hehr 4900 Series Screen Clip

[Borden]

This is the window working on getting moldings for can get deco bracket but it does not come with missing pin. schematic diagram would help a lot.

[Joe MacDonald]

try https://vintagetrailersupply.com/win...are-and-seals/

Joe

[Eric Frye]

I'm looking for the same rubber molding. If I ever come across something I let you know.

[Borden]

Have ordered close looking top seal, what should be an exact middle and sides seal. Did not find a bottom seal replacement may modify a different seal to make things work, will post how they fit when the order gets to me.

P.S. made a new pin for driver side out of a small bolt that was not full thread works great.

[Borden]

Top seal replacement works, center and side seal replacement is perfect but bottom did not work, new seal blocks window drains; have a small peice of new seal meant for bottom used on one side. Only two more windows to remove and re-putty.

Want to 3D print the 17" wide, 1" deep vent cap replacement embellishments, they do not make any that wide today, learning software. Caps are 14"

Old embellishments were metal, damaged and do not fit new cap vents.

Will post pictures of parts, and seals used later.

[John in Michigan]

Borden, congratulations on finding 3 types of seals that worked. Please post the source and part numbers for these three seals when you get a chance. Thank you.

[Borden]

-Different but worked
Model Number: H009-482 worked in top ok even though different no leaks

-These are ok
Model Number: H009-289 fit middle and sides of front window center section
Model Number: H009-344 Black H009-344-19 sliders and fixed sides of front

-Not ok but used a bit on each end temp shrinkage space filler
Model Number: H009-289 block drains and fit was poor

Still need a good bottom seal replacement

https://www.pellandent.com/
Pelland Enterprises
P.O. Box 210
2784 Shirewood Lane
Arnold, CA 95223
1-800-216-2786