Need Table for 13' Scamp - Fiberglass RV
Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-23-2016, 10:26 AM   #1
RHG
Junior Member
 
Name: Ronald
Trailer: Scamp/Casita
Colorado
Posts: 7
Need Table for 13' Scamp

Hello,

We need a dinette table for our 2012 13' Scamp in the lighter oak to match our cabinets, but Scamp does not sell them anymore. They only sell the white or cherry wood. Any idea where we can buy one?

Thanks a bunch!
RHG is offline   Reply With Quote
Old 05-23-2016, 10:35 AM   #2
Senior Member
 
Donna D.'s Avatar
 
Trailer: 1988 16 ft Scamp Deluxe
Posts: 25,796
Humm, the table in my Scamp is covered with Formica to match the kitchen. Buy a sheet of oak plywood at a big box store or wood store, cut, stain, install.
__________________
Donna D.
Ten Forward - 2014 Escape 5.0 TA
Double Yolk - 1988 16' Scamp Deluxe
Donna D. is offline   Reply With Quote
Old 05-23-2016, 10:40 AM   #3
RHG
Junior Member
 
Name: Ronald
Trailer: Scamp/Casita
Colorado
Posts: 7
Thanks, Donna. To save time and effort....ok, I'm lazy I would prefer to buy it if possible.

I just got off the phone with shop4seats.com and they have this table in medium oak for $89 plus shipping. Table Top - Dinette Hardware - Dinettes - RV FURNITURE

My concern is that I don't know if the colors will match well.

Can someone please give me the length of their table? I'm pretty sure it's 30" wide.
RHG is offline   Reply With Quote
Old 05-23-2016, 11:07 AM   #4
Senior Member
 
floyd's Avatar
 
Trailer: 2004 13 ft Scamp Custom Deluxe
Posts: 8,527
Registry
we made our table from 3/4 oak veneer plywood, iron on edge veneer, and polyurethane.(no stain needed) The match to the cupboards is excellent. Ours is a pedestal style but the idea is the same...

The stock table is 30" wide by 42-1/2" long with an angle cut on both sides of the leading edge to accommodate access. On the deluxe an additional board 30"X 10" is provided to make the bed. The latter need not match as it will only be used as a filler.
You should of course measure the width between the benches to get an accurate measure and subtract no more than a 8th inch to allow for an easy fit which is not too loose.
My advice, like Donna's is to make your own, you will save money, time and aggravation,and gain a warm sense of accomplishment.
PM me if you need more details or just encouragement on the project.
Attached Thumbnails
Pic012.JPG   Pic013.JPG  

floyd is offline   Reply With Quote
Old 05-23-2016, 11:48 AM   #5
RHG
Junior Member
 
Name: Ronald
Trailer: Scamp/Casita
Colorado
Posts: 7
Hi Floyd,

I really like what you did with your dinette. Very nice.
Looks like we'll be all in for $111.22 including shipping for that table I referenced. I think we'll roll the dice and see how it goes. I'll report back and let folks know how it goes. Hopefully it will help others in the same situation.

Ron
RHG is offline   Reply With Quote
Reply

Tags
scamp


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
small folding table in scamp Diane G Problem Solving | Owners Helping Owners 2 06-23-2008 04:31 AM
New Table for Scamp...UGH dsteinhoff Problem Solving | Owners Helping Owners 14 03-31-2008 09:53 PM
WTB: Scamp table andy vaughan Classified Archives 1 11-25-2007 05:37 PM
Stupid Question - I can't scamp table back up Dawn Gundermann Problem Solving | Owners Helping Owners 9 10-18-2007 07:32 AM
Scamp table Legacy Posts Problem Solving | Owners Helping Owners 7 06-10-2003 11:21 AM

» Upcoming Events
No events scheduled in
the next 465 days.
» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 08:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.