Setting up/Taking down front dinette layout A

[mgellar]

Hi,
We have a new Scamp 16' Deluxe Layout A with the front dinette. The dinette is set up and I wanted to know how to convert it to the bed and vice versa. I assume the table just pulls off the pole and the pole pulls out of the floor, but it didn't come out easily, so I wanted to make sure there was not other process. Haven't seen any instructions on this.
Thanks again for the time and help many of you provide.

Mike

[Pam Garlow]

This is how a standard pedestal table works: The table should pull off the pole, and remove the pole from the floor. The table would fit in between the seats, and the back cushions would fill in on top of the table to make the bed.

[mgellar]

Thanks! That's what I assumed, but it's good to know before I tried to hard perhaps missing something!