Lfoxmont: As far as the table brackets go, the type we have can be ordered through the
Scamp website,
table bracket. I don't know much about the
Burro, but I did a quick internet search. The pictures I saw of the
Burro show a 3 sided dinette. The
Scamp (ours at least) is only 2 sided and the table mounts to the back wall under the window. I am not sure if a modification can be made to make the bracket work for the
Burro, but I am sure someone on this forum could tell you.
To
paint the interior
fiberglass,it was first lightly sanded with fine grit sandpaper. Then wiped down with mineral spirits. Next a
self-etching primer was applied (this was in a spray can) to the benches. The benches were removed and prepped outside. We didn't want to remove the cabinets or closet so these were prepped inside and we did not want to spray this inside the camper. 3 coats of
Bullseye Zinsser 1-2-3 primer were then applied by an ultra smooth foam roller. Finally, 3 coats of Rustoleam semi-gloss patio furniture
paint was also applied using a smooth foam roller.