A local upholstery shop did these boat-like cushions....they are foam with vinyl bottoms and velcroed to the glass. If I am going to have a guest sleeping on the dinette I'll have to revert to std cushions.
<img src=http://www.fiberglassrv.com/board/uploads/3f0e1a318b2a6dinette cushions.jpg/>
Here is a detail of the pleating and the built up seat edge. Big improvement on comfort.
<img src=http://www.fiberglassrv.com/board/uploads/3f0e1a7c1d4d1dinette cushion.jpg/>
These streamlight clip-mate LED's are a boondocker's dream. The beam is narrow but quite bright and suitable for any task. They rotate 360 degrees and can be clipped to your hat bill or whatever. AT $15 each from MEI, I decided to get three and mounted one over the dinette, one beside the bed head, and one at the galley sink. ..can carry one to the bath I guess:O They run on 3 triple A's and have 120 HOURS of life.
<img src=http://www.fiberglassrv.com/board/uploads/3f0e1b6d86481clip mate led.jpg/>
I hate outside stuff inside. Here is one i started monday at the
rally..... a 6 inch PVC tube carries my lawn chair and tarps....two items i never had a good place for inside.
<img src=http://www.fiberglassrv.com/board/uploads/3f0e1bfd383476 inch tube.jpg/>
Linear Mode
