Primer layer on our Boler

[Niall]

Hi guys,

We applied 1 layer of Interlux Pre-Kote primer on our Boler so far, and the finish came up great.
We did not use any thinner, and it did not seem to have any negative effect.
Before applying the second coat, I just want be sure that there is no major issue with not using thinner.

Please advise.
Niall

[Mike_L]

Thinner, as the name applies, is intended to dilute the primer and is usually required for spray application as it is too thick to spray otherwise. Other means of application, brush or roller, you may not need to thin it down but it should still work. There will however be much sanding involved.