Slipper Storage in an Escape 21

[tractors1]

This is a follow-on for my Dirty Shoes storage.

Wifey wanted a place for clean trailer shoes/slippers. I didn't like the ETI cubby option alongside the door of the 21 so decided on a redesign. Putting in a 36 inch high cubby setup with 2 holes large enough to hold shoes, one high enough for seasonal stuff like bug spray, and a catch-all tray on top.

The 36 inch height was chosen to leave a 40 inch alcove above for mounting hooks to hold wet jackets from overhead hooks. Also a good size for shipping.....

All openings are 9 3/4 inch wide with cubbies that range from 12 to 8 inches tall. Depth to wall ranges from 3 to 7 1/2 inches (at the 36 inch height.)

Construction is all white ABS plastic with edging, using 3/4 by 3/4 poplar for mounting to the ETI framing.

Our layout is shown, making the cubbies over the next day or two.

[Pam Garlow]

Looks like its going to be really handy! Were you able to match the paneling?

[tractors1]

Not going to try and match the paneling; final white will match the fiberglass entry door area instead. Much easier to fabricate (all solvent welded) and keep clean.

Charlie Y