Hey! I'm Britney from Regina, Sask. I bought a 1971 boler
project last fall
without seeing it first(long story). I couldn't handle tenting another year. I don't have a family to worry about so I just wanted something for me to enjoy. The previous owner had new cabinets built with a new layout, I couldn't resist. I just wanted these cabinets. When it arrived in Regina(after a long 8+ hr drive) the door was held on with a tie strap, my key was actually the door handle and most of the cabinet doors had fallen off. Also the front end had a really bad sag going on. My dad is helping me out with most of the work and I've got a little extra help from the boyfriend for the major fibreglass repairs. It needs everything, lots of work to do! The front sag has been mostly repaired by removing the old patch job(holding everything in the wrong place), jacking it up and redoing the fibreglass on the floor and above the door. Seems to be holding fairly close to perfect. There are a lot of other situations that have us scratching our heads though. Anyway, I can't wait to get it done and start camping! I love all the cool ideas and advice I'm getting on these forums.