windows boler trailer

[garyr]

Hi, I'm looking at replacing side windows on my trailer. I'm knew to this and don't want to remove the windows until i am ready. Is the wall thickness uniform around the trailer as it seems to be between 1/2 to 3/4 ''. i have a Boler 13' made 10/74. Any help would be appreciated. Thanks.

[David B.]

Originally Posted by garyr

Hi, I'm looking at replacing side windows on my trailer. I'm knew to this and don't want to remove the windows until i am ready. Is the wall thickness uniform around the trailer as it seems to be between 1/2 to 3/4 ''. i have a Boler 13' made 10/74. Any help would be appreciated. Thanks.

Gary, the wall thickness is pretty uniform as you have suspected. The thickness of the fiberglass is much less, but by the time you add in the insulation, wall covering, and perhaps wood backing for the windows, you would be looking at 1/2” to 3/4”. Do you already have windows to replace your current ones, or are you simply removing them to re-glaze your existing frames? Butyl putty tape is the best to reseal the frames to the fiberglass shell when you replace them. Best of luck.
Dave & Paula