Update for Case #12009 - "54 watt coleman
solar kit from Cosco"
>
>Hello Pat,
>
>Thank you for using our products.
>
>Please provide us with your full mailing address and phone number and we
>would be more than happy to send the missing harness (available late May)
>at no charge.
>Thank you for your patience.
>
>Also, if you wish to splice the wires, we recommend splicing before the
>connector's end without removing the connector, in this way the harness may
>still be used once received.
>
>A system diagram may be found through our website at:
>
http://www.icpsolar.com/4105/system_setup.asp
>
>Simply connect all
solar panels together (+) to (+), and (-) to (-) though
>splicing or when the harness is received.
>
>Also, the kit does not include wiring from the controller to the
battery.
>We recommend using 14AWG stranded wire and installing only a few feet from
>the
battery.
>
>Sincerely,
>
>Anthony @ ICP Technical Support
>Welcome to the ICP Store, Let Our Power Give You Freedom!
>
www.solarcharger.com
>
>In the meantime, have you registered for our newsletter at
>
www.icpsolar.com? This online periodical gives you up to date information
>about
solar in general, new products, and even helpful suggestions to help
>you maximize the benefits of the solar solution from ICP that you have
>purchased.
>
>At ICP, we aim to provide our customers with the best possible care in the
>industry. If you feel at any time that you are not getting the best
>possible service, please do not hesitate to let us know and we’ll have
>someone from our Customer Service management contact you directly.
>
>
>Click here to update the Case online, or reply to this e-mail
>
>
>
>
>Message History
Well this seems promising
>
>
>
>
>