Graywater fitting broken

[Drawkcab]

Hi all,

I was trying to replace the sink drain setup in my new-to-me 2001 Scamp. In the process I cracked the gray water fitting and need to replace.

Two questions
1. How do remove the screws(?) That are holding the connector in place? They have a hole thru the center and nothing to latch onto.
2. Anyone know where I can order a replacement part? I didn't see any on the scamp website.


Thanks, Caitlin

Ps- I'm new to Scamps/RVing in general so I apologize in advance if I ask any dumb questions/use the wrong terms

[alan H]

Originally Posted by Drawkcab

Hi all,



I was trying to replace the sink drain setup in my new-to-me 2001 Scamp. In the process I cracked the gray water fitting and need to replace.



Two questions

1. How do remove the screws(?) That are holding the connector in place? They have a hole thru the center and nothing to latch onto.

2. Anyone know where I can order a replacement part? I didn't see any on the scamp website.





Thanks, Caitlin



Ps- I'm new to Scamps/RVing in general so I apologize in advance if I ask any dumb questions/use the wrong terms

They look like rivets so you would have to drill them out

[AC0GV]

Originally Posted by Drawkcab

Hi all,1. How do remove the screws(?) That are holding the connector in place? They have a hole thru the center and nothing to latch onto.

That is a pop rivet and needs to be drilled out. Use a slightly larger bit and just drill off the head.
Is it this one?
https://www.amazon.com/Camco-37271-E.../dp/B003VATEFS

[Darwin Maring]

Depending on how bad the crack is, You may be able to repair it.
Plumbers Goop and other plastic glues.
Can you take a picture of the crack?