Fiberglass RV - View Profile: John in Michigan


John in Michigan's Profile Picture

John in Michigan John in Michigan is offline

Senior Member

Profile Comments

Showing Profile Comments 1 to 9 of 9
  1. Borden
    06-27-2021 11:01 AM
    Borden
    Ours only says 1700 on ownership, but came with many options. Took almost 3 years of looking to find an original 4 burner magic chef oven replacement ours was beat up and poorly painted. We got one out of a 1977 Earton boler when it was scraped out of the trailer.
    We have wet bath with new replacement taps and shower head, The 22" stove replacement is an exact match one year older slipped right in, hot water tank new 4 gallon, new replacement furnace, new sink taps, Awning replaced roller and cloth but still have original arms, replace both power cap vents with same size, new pins in main door hinges, all new pluming pipes plastic instead of copper, new cabinet hinges, most interior lights new but vintage looking and more. We have had over 10 years of searching out parts to restore the egg.
  2. Borden
    06-25-2021 12:56 PM
    Borden
    We ordered 3 types will let you know what works out.
  3. Borden
    06-20-2021 11:11 AM
    Borden
    Our front window unit is the same as your side window. The top seal we will try to use is close but think it will work, the middle and up sides of center section is exact but we can not find the bottom seal. What did you use for it and where did you get it.
    Thanks
    Borden
  4. Borden
    06-13-2021 04:47 PM
    Borden
    Did you have to change the seals on your side window? We have the same window on the front.
  5. Borden
    10-03-2020 03:14 PM
    Borden
    It is unfortunate they changed the frunace design as it worked so well and uses only 0.5amps
  6. Borden
    09-27-2020 09:53 AM
    Borden
    Hi my message may have not posted to you so here is the furnace data;
    MPD Atwood 80 series 8012-11 it has a very low current needs saving battery power for when shore power not available and the profile worked in the original location on our boler. The furnace sits on a small platform and required a intake and exhaust extension from Atwood original space meets all its clearance needs. The front vent is a little smaller than the original face.
    We just move the thermostat to the temp wanted and it starts works great.
  7. Jean Jacques Lamoureux
    Hi John, My name is John Jack (Jean Jacques in French) I had a 4500 before, and i am looking for an the one. If ever you know some body who wants to sell his, Please contact me . jjlamoureux@videotron.ca thank's in advance J.J.
  8. Sarah81
    08-31-2017 07:45 AM
    Sarah81
    Hey John,

    Thanks so much for the comment. I really suck at searching. I wish Craigslist would let me search the entire state rather than going through each city. Unfortunately I can't afford much more than $3000 tops so I think I might be SOL lol. I am getting a Subaru Forester and I think this is pretty much all it could pull.
  9. Borden
    10-15-2016 07:42 AM
    Borden
    Hopen you got the message, ours has closed end pop rivets, 5/32 aluminum with steel mandrel; we are replacing them with new units they are closed-end but have a 1/32 neoprene washer and the heads cup on install instead of staying flat against the wall

About Me

  • About John in Michigan
    First Name
    John
    State/Province
    Michigan
    Country
    UNITED STATES
    Gender
    male
    RV Brand
    1979 Boler 1700

Statistics

Total Posts
Profile Comments
General Information
  • Last Activity: Today 07:34 PM
  • Join Date: 07-19-2015
  • Referrals: 0

Friends

Showing Friends 1 to 2 of 2

Registry


    1979 Boler 1700

    SOLD in April 2016.

    SOLD in May 2021.

All times are GMT -6. The time now is 09:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.