Maintenance & Restoration

Legacy Posts · 02-03-2003, 03:40 PM

Rick
I don't know.Its all over the place.Theres more of that stuff now.I think I'll package it and send to California.;)

Legacy Posts · 02-03-2003, 03:55 PM

No, Ches! Send it to Colorado!! That's where they really need it! (Northern NM would be GLAD of it, too!)

For REAL.

:wave

Legacy Posts · 02-03-2003, 03:59 PM

Mary
I live in a snow belt and ski area see www.fernie.com
This a poor winter for all.:o

Legacy Posts · 02-03-2003, 04:28 PM

Ches,

You do good work. I am particularly impressed with the floor. It looks so warm and inviting-- all you need is a fireplace and a bearskin rug!

Legacy Posts · 02-03-2003, 06:41 PM

Very impressive Ches............makes me want to start working on something for our Scamp.

Thanks for the pictures. :wave

Noel

Legacy Posts · 03-30-2003, 10:25 PM

Hi All
Today I installed my 2nd of two Thin lights.One more on order for above kitchen sink.I also installed a 12 volt outlet.

<img src=http://www.fiberglassrv.com/board/uploads/3e87c2ea7bb68flor.jpg/>

<img src=http://www.fiberglassrv.com/board/uploads/3e87c300552cf12v.jpg/>

Legacy Posts · 03-31-2003, 08:46 AM

Thanks so much for posting these pictures. I still haven't figured out how to do that. I think yours are very inspirational. Did you build your overhead cabinets?

Legacy Posts · 03-31-2003, 11:29 AM

Hi Maggie
No I did not build the overhead cabinet,It was there and I just repaired and painted.

Legacy Posts · 04-01-2003, 02:26 PM

Hi All
I just completed another little mod of building small shelve to hold MicroWave.It is mounted under the top bunk I had built earlier.

<img src=http://www.fiberglassrv.com/board/uploads/3e89f5c9b03d9m1.jpg/>

<img src=http://www.fiberglassrv.com/board/uploads/3e89f77745b85m2.jpg/>

Legacy Posts · 04-01-2003, 02:34 PM

good idea, Ches. you found the perfect place. :yep

Legacy Posts · 04-01-2003, 02:35 PM

Jana
Thanks.:wave

Legacy Posts · 04-01-2003, 10:38 PM

great mods!!! The bunk arrangement looks good for a ton of additional storage space.

Legacy Posts · 04-01-2003, 10:47 PM

Hi Phil
Thanks.That top bunk is really strong.Steel frame with 3/4 inch plywood and 2x4 legs.I got a couple other ideas kicking around in my head for that top bunk.:wave

Legacy Posts · 04-06-2003, 07:14 PM

Both Beds now complete with new bedding for up coming season.(If it stops snowing)MW securied for travelling,I hope.

<img src=http://www.fiberglassrv.com/board/uploads/3e90d0c6f25a0bed.jpg/>

Legacy Posts · 04-06-2003, 08:26 PM

Hey Ches,

That bunkbed mod looks wonderful! I really like the addition of the cubby for the microwave. Very creative use of space!

~ Melanie :thumb

Legacy Posts · 04-06-2003, 09:01 PM

Hi GregnMel
Thanks for feed back.Got a few more ideas to try yet.:wave

Legacy Posts · 04-06-2003, 09:41 PM

You have sent me docs and pictures a few days ago. Happy to meet you here. I have taken home my new 17' 1977 Boler. There are many renovations I want to make to, and what you have done is a great inspiration for my project If I am glad with what I will do, I will post some "before" and "after" pictures of it at end of spring.
A question : Is your furnace under the fridge ? Was it there when bougt the rig ? Mine is under the bunk, in center, but seller told me it doesn't work. Probably I have to replace it.
Once again, Congratulations
Raymond

Legacy Posts · 04-06-2003, 09:58 PM

Hi Raymond
Good to see you here.Yes my furnace is under fridge and it works ok.Have your furnace checked because you may only need a gas valve.Its in original position.
I think I have more fun doing Mods than camping.
Post some before and after shots.
Don't forget to go to Gen Chat and look for pole on different RVs and post your boler.:wave