Not liking the
Scamp sewer hose carrier, I made my own from a vinyl fence post and mounted it under the back bumper of the tow vehicle. In the second year of use I tore it off. Now in year five I damaged the second one. This time I ordered the Valterra hose holder and mounted it under the
Scamp just ahead of the
tires and about 3 inches higher than the
axle. This places it between the two dump ports on my 16’
Scamp. The unit looks good but was hard to mount on a Scamp because the two sides are not symmetrical and I had to add spacers to street side while the curb side was bolted directly to the frame .
2017 Scamp Deluxe
Linear Mode
