Quote:
Originally Posted by Mark Shaffer
If you are installing a new vent/fan in the place of the old Vent, the new fan in the vent is 12 volt dc and the wiring in the junction box for the A/C is 120 volt ac. That wire will not work for your fan installation, it will need a 12 volt power supply wire ran to the vent/fan.
|
Good point. We don't have a fan..... Makes sense that they are 12v, Doh!
It would be possible to wire a 110v outlet and use a 12v wall wart to run the fan in the vent. That would also let you put a
microwave in that cabinet (we did).
Or, on the inside of the cabinet under or above the
fridge there will be a 12v pair going into the wall
light over the passenger side couch. One could put in a small box and tap that circuit. Or, Like Frederick said, go off the Kitchen side
light..
Nice pictures, Frederick. Tried to show ours but the foam and white
paint on the ceiling hide the conduit...