My
Boler door is in good shape, as is the frame to which it is mounted. However, the door sits just a wee bit crooked, due hinge misalignment. Each hinge, as you all know, is secured with two screws per hinge. The top hinge, and the top screw on the bottom hinge I have been able to loosen with the application of heat on the screw. And, this allows the door to be adjusted to sit squarely, but with a larger gap on one side than the other.
However, the bottom screw on the bottom hinge sits in a very awkward position. I have tried everything I know of but cannot apply enough force to loosen the screw - and, I am afraid of destroying the hole for the screwdriver.
Any thoughts on how to get at this offending screw? The only thing I can think of is to drill it out. Thanks for your comments.