Scamp 16 (2003) water pump

[JoeCool]

Neither of my water pump wires are connected.

If you search my recent posts, I have a black wire hanging down a hole in the wheel well that I’m guessing is one of the ones for this. Of course, I’ll test out that theory.

But what about the other wire? There are no other loose wires hanging about near the pump or out the hole...

Anyone want to send me a pic of where your wires are coming/going so I could start to look in that direction?

Thanks!

[Joe MacDonald]

Originally Posted by JoeCool

Neither of my water pump wires are connected.



If you search my recent posts, I have a black wire hanging down a hole in the wheel well that I’m guessing is one of the ones for this. Of course, I’ll test out that theory.



But what about the other wire? There are no other loose wires hanging about near the pump or out the hole...



Anyone want to send me a pic of where your wires are coming/going so I could start to look in that direction?



Thanks!

White in the trailer would most likely be a negative wire, so it makes sense to go to a black which is typically negative on a pump, so what you are looking for is the positive wire for the pump, typically it would be coming from a rocker switch labeled "pump", if you have that switch, it might direct you towards the wire location
Joe

[JoeCool]

Thanks Joe!
Yeah, the rocker is in the normal place (next to the sink) but the wires run behind the rat fur, behind the sink cupboards. (I pulled on them a little and they were pretty secure) So I was a little reticent to pull them out. It's probably one of those.

Anyone know where the pump is normally grounded? Nearby or maybe to some common ground wire?

Cheers all.