Upgrading to a twist-lock plug on my Scamp 13

[Mark in Oklahoma]

I finally got around to installing a twist-lock plug for the shore power cord. I printed a spacer to fit behind the metal adapter ring that conforms to the contour of the Scamp shell. That allowed the adapter ring to install flat and also minimized the amount of sealant used. It's all tight and with no distortion. I used the Marinco kit from Amazon. It seems like a well made kit.

Mark

[Campingbliss]

Looks good! Do you mean you,printed out a fitted piece with a 3D printer?

[Mark in Oklahoma]

Yes, a 3D printed spacer flat on one side and contoured on the side toward the Scamp. I did not like most installations I have seen because of excess sealant and distortion of the mounting. This piece kept everything flat and smooth.

Mark