Reconfigure Trailswest Pop-up
Okay, some advice or ideas, or you're nuts to try that.
I have to take the plywood off the pop top of my trailer as there is a leak and it is coming through. I think I am going to find some dry rot. The roof is really heavy after a rain. Since I need to take the top off I have been considering making it so the sides of the top are semi-rigid. By that I mean that the ends would be 1/2 in plywood that would fold down and secure (not sure how yet). This would be to stabilize the top, which tilts to the side even when level. I am also thinking about doing the same on the sides.
So, I am looking for advice and what kind of problems I need to consider.
Thanks for all your thoughts and ideas.
Teri
|