Trillium axle finally installed!

[Jorge from T.O.]

Hi Folks,
Thanks to all those that offered advice, I ended up having the new Flexiride axle put on without having to remove the shell from the frame. I went w/ the Flexiride adjustable as many of you suggested, starting at 22 degrees down and I've got plenty of clearance and options to dial it in. I also had the optional side mount brackets welded to the frame and bolted my axle to them. I am going w/ a bigger and taller tire ST205/75R14, sits nice behind my 4 runner.
Will fly up some photos soon. Will be heading south along the I75 in the next few days, cheers and happy holidays!

[Dan-NS27]

Sounds good. I'm looking to do some work on my Burro and been leaning towards the Flexiride axle. Also looking to replace the frame.

[thrifty bill]

I just put 205/14s on my 1977 Trillium 1300 myself. Since the axle is original, figured a new one would be coming in the near future.

[Jorge from T.O.]

Here's a few shots of the new axle and tire clearance, cheers, Jorge.

[drd715]

Where do you get the flexride and what spec's for a Trillium 4500?

[Jorge from T.O.]

I got the axle from CERCA in Ontario, Canada, my trailer is a 1300 so I don't have the specs for a 4500, you should probably have it measured regardless.
Here's a link to Cerca/Flexiride, FLEXIRIDE AXLE
I got the #7 2200lbs w/ electric brakes.
Just did 5000kms to Florida and back, worked perfectly, cheers, Jorge.