Boler door Channel

[mensie]

Originally Posted by omache27

Mensie,

Thank you for the lead. So far all suppliers have wanted a crazy amount of Dollars for shipping so I'll phone them tomorrow as I am not sure they will deliver to BC Canada and what the cost will be.

Elvin

Elvin,
would you min sharing what the cost would be including shipping as Im in nee of the same material.

[omache27]

Thanks to all how helped with my Trim inquiry. I eventually ordered it through Scamp who were very helpful. If in Canada it is better to order parts over the phone as then you can ask them to ship via USPS which is much cheaper than UPS.

Elvin

[omache27]

Originally Posted by mensie

Elvin,
would you min sharing what the cost would be including shipping as Im in nee of the same material.

I spoke to Ryan at Scamp and he thought it would cost +- $15 to ship via USPS. Not a quote - just an estimate. I will let you know when I get the actual shipping cost.

Elvin

[omache27]

Originally Posted by omache27

I spoke to Ryan at Scamp and he thought it would cost +- $15 to ship via USPS. Not a quote - just an estimate. I will let you know when I get the actual shipping cost.

Elvin

And total cost.

[Bryvia]

Hey Elvin,

I restored a 17' 79 boler and the only thing I have not put on is the pinch mold around the door. I went to fraserway RV but every RV and marine place I went to only carries the "V" shaped pinch mold. They call it a 6mm or 1/4" but it wont stay over the edge of the fiberglass. It has to be more of a "U" mold. Especially if you have insulation and head liner on the inside. I have yet to track down the right stuff. Plese let me know if you do end up finding somthing that works!
Thanks

[mensie]

Originally Posted by Bryvia

Hey Elvin,

I restored a 17' 79 boler and the only thing I have not put on is the pinch mold around the door. I went to fraserway RV but every RV and marine place I went to only carries the "V" shaped pinch mold. They call it a 6mm or 1/4" but it wont stay over the edge of the fiberglass. It has to be more of a "U" mold. Especially if you have insulation and head liner on the inside. I have yet to track down the right stuff. Plese let me know if you do end up finding somthing that works!
Thanks

Just yesterday I ordered the trim from scamp 17' of it as well as 20' of mini trim. to a tune of just over $100 CDN including shipping.

https://www.scamptrailers.com/parts-...pes-trims.html

If you do order from them be sure to tell them to ship USPS , normally they ship UPS but those buggers will charge you a brokerage fee extra and they are way more expensive.

[omache27]

Hi Bryan,

I've ordered the U trim from Scamp and should receive it soon. I'll let you know how it works out.

Elvin

[k0wtz]

what does utrime look like?

thanks

bob

[Bryvia]

Originally Posted by k0wtz

what does utrime look like?

thanks

bob

Hey Bob,

https://www.scamptrailers.com/parts-...ft-detail.html

I was just hoping to get in black. but looks like it could be painted.

[omache27]

You can see it on the Scamp website below;

https://www.scamptrailers.com/parts-...pes-trims.html

[mensie]

Received my door trim and mini trim that goes around the edges of the counter, closet and upper cabinet edges. It matches the ensolite skin nicely.

[omache27]

I received mine yesterday as well but the width is different from the Boler original. I still might be able to make it work.

Elvin

[k0wtz]

so only in white now?

thanks

bob

[mensie]

Originally Posted by k0wtz

so only in white now?

thanks

bob

From Scamp? Yes.